Be the first to get the latest updates and exclusive content straight to your inbox.
Please Note: Today’s order cut-off is at 11:30am. Any orders placed after this time will be processed tomorrow.
Please Note: Today’s order cut-off is at 11:30am. Any orders placed after this time will be processed tomorrow.
Select 2K QHD to choose from 30FPS or 60FPS
A higher frame rate can deliver both smoother and sharper images
The greater the amount of data on the image displayed through the screen, the better the image quality.
The U3000 provides a clearer image by adjusting the number of bits per second of recorded images stored
Standard Option – 24Mbps
High Option – 30Mbps
Sony STARVIS2 IMX678 will be applied to the Dashcam for the first ever Optimized night vision technology allows capturing images in low-light conditions both continuous & parking recording.
Record the moment when maximising low light conditions by SHCG (Super High Control Gain)
Parking Surveillance mode is automatically activated when you turn off the ignition. This captures footage when a motion or impact is detected so you have video evidence of mishaps like hit-and-runs while you’re away from your vehicle.
*Requires Hardwiring Cable or OBD II Power Cable and installation for Parking Surveillance mode
(professional installation recommended)
Front and Rear Detection with 2 Channel Models
Dual RADAR will be applied to the Dashcam for the first ever
Dual RADAR is built into the front and rear cameras and When a person or vehicle is detected in a low-power recording situation,
it immediately wakes up and starts recording motion.
Sensitivity can be set in 5 steps and can be detected from 1M minimum to 5M maximum
U3000 Dual RADAR Standby Times
Monitor and capture any motion around the vehicle for potential vandalism attempts.
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
U3000 Energy Saving 2.0 Standby Times
* Based on 4,500mAH battery (BAB-50)
* Variables: Temperature, the efficiency of the battery by usage time, and change in current after a detection.
Strong Impact Notifications while Driving
Impact Notifications when Parked
Send Emergency Message
Remote Live View
Vehicle Status & Driving History
Captured Image of Most Recent Parking
Get audio warnings from your cash cam when approaching a wide variety of road safety cameras*.
Thinkware Dash Cams provides active alert for these 5 types of road safety cameras while still recording videos.
*UK speed camera (Cyclops) database with regular free updates
Red Light Warning System
Speed Camera Warning System
Red Light & Speed Camera Warning System
Average Speed Warning System
Mobile Zone Warning System
NEW
Rear Collision Warning System
(RCWS)
The vehicle enters the rear for more than 50 km, it will automatically alert the user and record.
Forward Collision Warning System
(FCWS/ uFCWS)
Warns the driver of impending road hazards.
Front Vehicle Departure Warning
(FVDW)
Lane Departure Warning System
(LDWS)
Detects if the vehicle is veering off the driving lane.
With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.
The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
Built-in Bluetooth allows hassle-free dash cam pairing with your compatible Android or iOS device via the Thinkware Link App.
Once paired, replay your latest driving videos and manage your dash cam’s settings with the Thinkware Link App.
CHECK RECORDED IMAGES AND
UPDATE FIRMWARE USING SMARTPHONES
Your smartphone and the U3000 can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for U3000’ with built-in Wi-Fi in the navigation.
Check, download or delete recorded images, update firmware or update safe driving information on the application.
Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.
One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.
When a high temperature occurs, it switches to Low power mode, and when it enters a stable Temperature, it actively changes to the existing Recording mode.
* Provide optimised energy saving with THINKWARE`s external battery
Designed to be mounted inside the vehicle on the rear window facing out. A 128° wide-angle lens captures all footage from behind the vehicle in 2K QHD detail. A great enhancement to parking mode.
Includes Radar functionality for the rear of your vehicle.
Be the first to get the latest updates and exclusive content straight to your inbox.
