X800 Key Features
- Dash Cam
- 12V Power Cable
- MicroSD Card
- USB MicroSD Card Reader
- Windshield Mount
- Spare 3M Mounting Tape
- Adhesive Cable Clips
- Quick Start Guide
- Resolution :
Front – 2K QHD (2560 x 1440)
Rear – Full HD (1920 x 1080) [Optional]
- Camera :
Front – 5.14MP Sony STARVIS
Rear – 2.13MP Sony STARVIS [Optional
- Frame Rate : 30 fps
- Viewing Angle: 150° (Diagonal)
- Storage Temperature : -20°~ 70°C (-4°~ 158°F)
- Operating Temperature : -10°~ 60°C (14°~ 140°F)
- Capacity : MicroSD card 32/64/128GB (UHS-I)
- Input Power : DC 12/24V, Built-in Super Capacitor
- GPS : Optional GPS Antenna
ROAD SAFETY WARNINGS
2K QHD Video Quality
Parking Surveillance Mode
Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.
Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality
Monitor and capture any motion around the vehicle for potential vandalism attempts.
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
Time Lapse Parking Mode
Energy Saving Mode
Super Night Vision
Whilst in parking mode the Thinkware camera uses advancements in lens and computing power to revolutionise night time recording with their Trademarked Super Night Vision.
The system uses ISP (Image Signal Processing) technology and real-time image processing to capture far greater detail at night, further protecting your vehicle whilst parked.
Access your camera's full potential with the Optional GPS Antenna
Advanced Driver Assistance System (ADAS)
Forward Collision Warning System
Warns the driver of impending road hazards.
Front Vehicle Departure Warning
Lane Departure Warning System
Detects if the vehicle is veering off the driving lane.
With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.
PC / Mac Viewer
The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
Wide Dynamic Range
Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.
Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.
Night-Time Quality Correction
Most videos recorded on a dashcam in the dark are generally difficult to make out details. That is why this dashcam uses enhanced sensors that come with a standard function of brightness and colour control as well as noise cancellation. These increase the quality of the image and ensure your videos are always the best quality possible.
Multiple Recording Modes
CONTINUOUS RECORDING MODE
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
INCIDENT RECORDING MODE
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
MANUAL RECORDING MODE
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
Format Free Technology
Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.
One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.
High-Temperature Protection System
Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data.
The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.
Designed to be mounted inside the vehicle on the rear window facing out. A 150° wide-angle lens captures all footage from behind the vehicle in FHD detail. A great enhancement to parking mode.