£179.00
3 in stock
Products listed as Refurbished are fully operational, tested and function as intended. All units are supplied complete with all components as standard.
Cosmetic blemishes: Packaging may be damaged, with Minor imperfections like scuffs, discolouration, or dings.
Returned items: Products that were returned by a customer within the return or exchange period, replaced under guarantee, or returned by the original courier.
Display units: Items that were used as display units in a shop or opened for photography purposes.
Items listed as Refurbished are supplied with 24 month’s warranty.
The X1000 dash cam from Thinkware comes with the highest quality 2K QHD footage via the latest Sony Starvis image sensor. With the new HDR system and Super Night Vision 3.0, this camera provides the very best videos of your journeys no matter the time of day.
Keep your car protected at all times with Advanced Parking Mode, Timelapse Mode and Energy Saving Mode and add the optional Radar accessory to access even more features.
With a 3.5″ full IPS colour touchscreen allows ease of access to everyone at any angle or time of day, allowing you to view footage, or play with the settings without having to remove the SD card
Capture maximum image detail. The X1000 automatically corrects exposure levels with the multi-exposure feature, enabling the unit to get a clean image even when light levels are too high or low.
Record night-time drives with true colours and minimal noise thanks to Thinkware’s latest advancements in low-light recording technology that surpasses its predecessors’ nighttime performance. The dash cam uses a combination of Digital Overlap High Dynamic Range (DOL HDR) and Noise Reduction technology to effectively reduce noise and lens flare effects that typically affect nighttime footage.
Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.
Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality
Monitor and capture any motion around the vehicle for potential vandalism attempts.
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
Add the optional radar to access even more from your camera’s parking mode. With energy-saving mode, the dashcam will enter sleep mode when in parking mode. When the radar detects motion, the dashcam will power back up. If an impact is then detected, the camera will then save a 20-second clip (10 seconds before impact and 10 seconds after impact) and store this for viewing. If no impact is detected the unit will simply power back down to save your vehicle’s battery.
Forward Collision Warning System
(FCWS/ uFCWS)
Warns the driver of impending road hazards.
Front Vehicle Departure Warning
(FVDW)
Lane Departure Warning System
(LDWS)
Detects if the vehicle is veering off the driving lane.
With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.
The intuitive and simple-to-use interface of Thinkware Dash Cam allows you easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.
One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.
Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data.
The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protect the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.
Be the first to get the latest updates and exclusive content straight to your inbox.